VLink Series is a cost-effective Camera Link repeater to dramatically increase the distance
between a camera and frame grabber. It amplifies video signal that are attenuated on the
Camera Link cable and doubles the available cable length through LVDS output connector
equipped with a pre-emphasis feature.VLink Series allows not only to simplify the machine
vision systems but also to save the cost with the least number of the repeaters and cables. The
VLink-Base model supports Camera Link Base configuration and the VLink-Full model supports
Camera Link Base/Medium/Full configurations.
|Camera Link Configuration||Base||Base/Medium/Full|
|Pixel Clock||20 ~ 85 ㎒
|Connector Type||MDR 26 / PoCL Compliant
|Operating Temperature||0 ~ 50℃
|Power Requirements||8 ~ 24 V DC
|Power Supply||Power adapter (not included) or PoCL compliant|
|Power Consumption||Typ. 2 W||Typ. 4 W|
|Dimension (W×H×L) / Weight||92 ㎜ × 23 ㎜ × 68 ㎜ / 160 g||92 ㎜ × 23 ㎜ × 87.5 ㎜ / 400 g|
|*Max. Cable Length by Pixel Clock|
|Configuration||Camera to VLink||VLink to VLink or Grabber|
|Cable Length||40 ㎒
||< 10 m||< 20 m|
|60 ㎒||< 8 m||< 15 m|
|85 ㎒||< 5 m (4 m at 10 Tap)||< 10 m|
Max. cable length may vary depending on the type of cables and systems. Standard Camera Link cables are recommended.
Specifications are subject to change without prior notice.